R2 ventures out

The day finally arrived. I was going to show off R2 to the public. Up until this point, he’d not been out of the garage and only had a handful of visitors (including a few local kids… ‘have you got an R2D2 in your garage?!). I was a little nervous.

Transport

I’d only arrived home at about midnight the night before after having left a convention early (unheard of! Miss the survivors photo! What?!), not to mention I’d been in the convention hotel for 10 days by that point. After contacting the organiser of Morecambe Comic Con, he had said I could get there early to avoid the crowds and find a safe spot for R2. This meant being up, ready, loaded, and in Morecambe by 9am! One slight issue, well many issues with that time, but the main one being I hadn’t actually tried to load R2 into my car at all yet. I knew from measurements that he wouldn’t fit in in three legged mode, which was one of the reasons I’d built his sled. I also knew that the sled made it nice and easy to get him stood up in two leg mode. So all that was left was to see if the sled would hold up and get him into the car.

Success!

He fitted. Was a two person job unfortunately, but I have a few ideas to make it easier, and hopefully turn it into a single person job for the next event.

Arrival

I managed to get to The Platform in Morecambe at about 8:55am, and hunted down the organiser. Thankfully Joy had followed me down, so helped me unload R2 infront of the Platform. Switching him from two leg mode to three leg isn’t too hard, 8 nuts to tighten on the shoulders, and some ankle locks to put in place on the feet. Unfortunately I had forgotten the spanner to tighten the nuts so had to get them as tight as possible by hand. Then came the fun of getting him in the building. The pavement surface outside was not conducive to operating an astromech. For something supposedly highly advanced, he doesn’t like to run on anything but a smooth surface. So, with a bit of lifting and a bit of dragging R2 entered the building. Thankfully once inside the floor was nice and smooth, perfect for R2 to have a wander.

As I brought him in and scouted out the place, I encountered a few handling problems. It appeared that I’d lost one of the shims from a foot which meant one of his drive wheels wasn’t getting the grip it should. This led to him veering off to the right all the time and at one point he encountered a stall and destroyed a lego figure! After apologising profusely, I found a corner to sit him in and waited for the crowds to appear.

Time for the fun

Right about 10am, the doors opened for early access and I decided to move to the now closed fire escape. Up to this point, it had been open for people to bring their wares in for the stalls. Now it was a nice empty space to place R2.
Slowly the place started to fill up and R2 had his first visitors. The day started to just fly by after that. I just loved the reactions he was getting from people of all ages. It was so enjoyable to make people jump a little when he moved over to them, and I slowly got used to the controls and being able to give him a little personality. Up to this point, I’d only had a tiny space in my garage to move him, now I had a much larger area and could try a few different things. Kids seemed to love him, sometimes a little too much, but I’d already decided to work on the premise that if they managed to break something then I need to make it stronger. R2 should be a bit interactive. Tho there were times when I wished I had the cattle prod attachment on him. He got plenty of tugs on the HPs, and a few extra spins of the dome, and I managed not to trap any inquisitive fingers in the dome panels when they opened. One little girl however didn’t like him waving at her with a utility arm. I loved some of the cosplay at the event too, there were some fantastic costumes on show, including a friend of mine who came as Kylo Ren and hung around for pictures.

R2D2 playing nicely with Kylo

I tried to stay out of the way as much as possible as it breaks the magic if they see the wizard behind the curtain, or rather the guy holding the controller. When I was spotted, quite a few people were amused at the fact I was using a standard PS3 controller to operate him. A few people wanted to know how he worked, or more details about the build, which I was more than happy to supply. Possibly a bit too much information was given at times, but they were polite enough to keep smiling whilst I talked.

At one point, I was even interviewed by a reporter from the local newspaper. She asked a few questions and took a short video of R2 doing some spins, and uploaded it to their facebook page. The main site had an article released today, and I was mentioned and quoted in it.

I had a few friends come and visit me too, after all I had been talking about R2 so much over the last few years they wanted to actually come and see what I had been wittering on about. I’d like to apologise now for the nonstop talk of R2. Most who saw him agreed it was a worthwhile project!

Oh No, breakage!

Trying to hire R2D2 as an Auror

There was an issue with the main dome drive, which I gave up trying to fix towards the end of the day. Thankfully noone seemed to notice that he wasn’t turning his head much. I was pleasantly surprised by the battery, which after a full day of entertaining was only just down to below half capacity. Also, taking him back to the car over the rough surface outside shook a few parts off him finally. I knew something would end up falling off, but they held on all day at least!

R2D2 gets the ladies…

Conclusion

Already hoping to be at another event on Star Wars day, a May the Fourth event at Southport Vue cinema. Just need to get his MOT and my driving test, so he can be an official Builders Club droid. I’ll should have the door panels finished for the next event too.